• Designed for steam and other compressible fluids
• ASME Code Section I and VIII
• 3/4″ through 2-1/2″ Threaded Design
• Orifice Sizes D-J
• Pressure Range 5 to 350 PSI
• Temperature Range -20F to 420F
• Cast Iron Body with Brass Base and Trim. Bronze Bonnet is available and Stainless steel base and Disc are optional
• Blowdown 4%

Product Information:

• Cast iron safety valve for low pressure steam, steam heating boilers, and steam generators as well as air service applications.
• ASME Code Section I and VIII
• 1/1/2″ through 6″Flanged or Threaded Design
• ANSI Class 250
• ANSI Class 250
• Temperature Range -20F to 406F
• Brass Trim is Standard with Stainless Optional
• Blowdown 4%

Product Information:

• Cost effective high capacity flanged steel safety valve designed for steam service
• ASME Code Section I and VIII
• 1/1/2″ through 6″Flanged Body
• ANSI Class 300 & 600
• Orifice Sizes F-Q
• Temperature Range -20F to 1000F
• Alloy and Carbon Steel Body w/ Stainless Steel trim
• 4% Blowdown
• Thermodisc provides superior repeatable seat tightness

Product Information:

• Designed as a totally enclosed thermal relief valve for non corrosive liquid service.
• Non Code
• 1/1/2″ through 2-1/2″ Threaded
• Pressure Range 5 to 300 PSI
• Orifice Sizes D-J
• Temperature Range -325F to 406F
• Cast Bronze bonnet, brass base & trim and PTFE seats are standard.
• 7-15% Blowdown

Product Information:

• Available in a wide range of options and features.
• The standard rugged configuration is equipped with corrosion resistant trim, steel body and cap
• Top guided for free and repeatable action.
• Designed for easy maintenance
• Bellows construction available for back pressure applications
• Available in 150-2500 ANSI Class
• Available in Inlet Sizes 1″ to 12″
• Wide range of materials for special applications

Product Information:

• General purpose portable relief valve for Air, Steam or Water.
• Designed in accordance with ASME Section VIII.
• Valve is normally supplied with both male and female threaded inlet and outlet in sizes 1/2″ to 2″ , but is available in socket weld and flanged connections as well
• Useable in pressure ranges from 5 to 8000 PSI depending on the size
• Materials of construction are normally steel body and stainless internals, but is available in 316 Stainless Steel, Monel, Hastelloy or Alloy 20.
• Valve is available in standard metal to metal seating, but is also available in soft seating providing for bubble tight shut off up to 97% of set pressure

Product Information:

• A general service relief valve for use on Air, Water or Steam.
• Sizes 1/2″ to 2″ threaded male inlet and female threaded outlet.
• Set pressures up to 500 PSI for all services except the 2″ is limited to 100 PSI for Steam
• ASME Section VIII Carbon Steel body with Stainless Steel Base, Disc and Disc Holder

Product Information: